Wired or Wireless?

This is the first question every buyer faces. Wired microphones offer a stable signal with no risk of dropout and require no battery management – which is why they remain the standard in recording studios and on large stages with fixed setups. Wireless systems, on the other hand, give performers the freedom of movement that is invaluable on stage.

Key Parameters to Consider

  • Frequency response – for vocals look for an 80 Hz–15 kHz range; for instruments match the response to the application.
  • Sensitivity and SPL – dynamic microphones handle higher sound pressure levels (ideal for drums and guitar cabs), condenser microphones are more sensitive and capture fine detail.
  • Polar pattern – a cardioid pattern rejects stage reflections; a supercardioid provides an even narrower pickup but requires more precise monitor placement.
  • Wireless latency – professional systems achieve latencies below 5 ms, fully transparent for live use.

Wireless Frequency Bands and Licences

The UHF band (470–790 MHz) is allocated for wireless microphones across most of Europe. Before purchasing, verify that specific frequencies are not occupied by television broadcasts in your area. Systems with automatic frequency scanning significantly simplify setup at the venue.

Multi-Channel Management

Running several wireless systems simultaneously requires careful frequency coordination. Most professional systems include frequency management software that automatically suggests an optimal channel combination free of intermodulation. For events with more than eight wireless channels, we recommend consulting an RF specialist.

Operation and Maintenance Tips

Quality equipment demands careful upkeep. Clean microphone capsules regularly, inspect cables and connectors, and store microphones in protective cases. For wireless systems, use only manufacturer-recommended batteries and replace them before every show.

Conclusion

The right microphone system is an investment that pays off in sound quality and on-stage reliability. Test your equipment under real-world conditions and consult a specialist when in doubt.